How to use an Electric Pressure Washer?

Learn How to Use an Electric Pressure Washer For A Fantastic Job of Blasting Dirt Away.

With time, like every other household work, cleaning takes more time than we have.

Pressure washers are incredibly efficient, and there are many pressure washer uses for household purposes. It is wise spending and speeds up a range of cleaning work.

It doesn’t require much maintenance and is very easy to carry. There are safety precautions and many factors to keep in mind while using a pressure washer, but it is overall effortless. Following are the essential steps you need to follow to be aware of using an electric pressure washer.

Safety precautions:

As stated before, electric pressure washers are just as dangerous as gas pressure washers. You need to make sure about the safety of the ones around you, of yourself, and the material as well. An electric pressure washer can tear or break any surface from glass windows to brick floors upon much pressure. Read the manual along with the machine for exact precautions relating to the machine you bought for your needs.

You need to wear work gloves, hard boots, even safety goggles. Wear safer clothes. Another measure is to remove any stuff you think can be damaged or hurt while you clean, especially while cleaning areas like the kitchen or furniture in your room. You need to remove every tiny thing that could come in the way of the surface to be cleaned and the nozzle.

Pre-washer cleaning:

Before you start cleaning your house with the washer, remove any extra material placed around, like flower pots, accessories, and other small stuff. It would be best if you also cleaned the loose debris in and around the area you’ll be washing. All of these steps are crucial for the safe and efficient use of the electric pressure washer.

Choosing the Right Nozzle:

Before knowing how to use an electric pressure washer, you must know how to set it right for your task! Every type of cleaning needs a different nozzle tip that would suit your job. Nozzles range from a red-colored 0-degree tip that uses adamant stains to the black one used with soap.

The red nozzle is usually used for adamant stains. These are rarely used at home but instead very useful for heavy duties at pressure washing businesses. This one’s used on concrete floors or walls and metal surfaces at times. Next is the yellow-colored 15-degree nozzle, operated from a distance to the walls or surfaces with a little less tough stains.

The green (25 degrees) and white (50 degrees) nozzles are used for even lower pressure (mostly household) purposes. To wash windows, cars, furniture, and kitchen areas, these are the most common. The lowest degree black nozzle is used with soap/detergent for some cleaning needs. It would help if you chose the nozzle specific to your requirement.

Connecting Hose to Inlet:

This is how you set up a pressure washer. Connect the garden hose to the water inlet. Next, turn the tap on! Ensure the flow of water remains the same throughout the cleaning because if the water stops, it will damage the washer. If required, fill the soap or detergent into the washer. There are no additional instructions for detergent usage, but you can look up a little to use pressure water with detergent.

Start the Trigger:

Switch on the main motor plug after you have checked the GFCI. Hold the gun and press the trigger that will put the motor inside the washer on. Whenever you leave the trigger, the engine inside will go off. While you keep the trigger pressed, start washing the surface since your washer is now ready.

Before you read how to start a pressure washer, make sure to only keep a small number of tasks for one time running the washer. This is because running an electric washer too long may have consequences, though this usually depends on the quality of the washer you’re buying. Keep a handful of tasks in mind but do not run the washer for too long!

Cleaning Pattern and intensity:

Often small patches of dirt are left even after cleaning for long. Make sure to keep a close eye on the surface and take the nozzle a bit nearer if needed. However, since too much pressure can cause property damage, keep the nozzle 4-5 inches away from the area.

While washing with an electric pressure washer, keep in mind your technique also comes to practice. You can switch patterns while cleaning from diagonal to grid cleaning; this is useful when cleaning walls and elevated areas. Another crucial safety precaution is that you should not leave the water running and go for a pause while the water’s running.

The pressure and speed should also be increasing in a pattern if you really need the increase in pressure. This means you start from low pressure and gradually increase for areas that need much pressure. However, it is better to take the nozzle a bit nearer to the material rather than switch the flow rate many times.

Post-cleaning steps:

Leave the trigger gun and switch off the main motor switch when you’re done washing. Separate the host and the gun after putting the water tap off. There will be much water left in the hoses, so try to remove it as much as possible. Next, remove the nozzle, and you’re done! You’re done with the manual and guidelines about how to use an electric Pressure washer.


The steps about using an electric pressure washer are elementary if you keep the safety steps and precautions in mind. It can be a real danger if you misuse such a machine. Make sure to choose the right pressure and tips while you use them. The pressure should be low and balanced for household needs, however many times; a higher flow rate is also needed. It depends highly on your needs and what you’re using the washer on.


Flinn Milan

Flinn Milan is the content director at Washwith. He is responsible for developing helpful content in collaboration with other hard-working team members. Over several years, his content strategy is mainly focused on describing and highlighting every product with its positive and negative points

Leave a Comment