Any new washing machine with a spinner in the spin cycle spins the clothes around at a high speed to remove water from them. This fast-spinning action forces the water out of the clothes rapidly. The washer then spins the clothes in the opposite direction to remove any remaining water.

This fast-paced spin cycle can be noisy and may cause the machine to vibrate. This is normal and is not a cause for concern until you notice your new washing machine is shaking violently on the spin cycle.

New Washing Machine Shakes Violently During Spin Cycle

When your new washer vibrates excessively during a spin cycle, it can cause damage to the machine as well as the structure it is sitting on. The main damage that can occur is to the washer’s legs or leveling feet, which can become damaged or even broken over time.

If you leave your new washing machine unleveled, its noisy vibrations can also damage the washer’s tub, which can lead to leaks. Additionally, the vibration can cause the washer to walk across the floor, which can also damage the flooring.

Moreover, your washer can become noisy due to constant vibrations. Therefore, there are many reasons you would not want your new washing machine to shake violently during the spin cycle.

You May Also Like: How To Replace Washing Machine Balance Ring That Vibrates Excessively

Why Does My New Washing Machine Shake Violently During The Spin Cycle?

Below are some of the reasons that make your new washing machine shake violently on the spin cycle. We have also provided a doable solution for every problem that you can perform easily at home to fix your shaking washer.

1. Unbalanced or undistributed Load

If your new washing machine is vibrating excessively during the spin cycle, it is most probably due to an unbalanced load.

This means that the weight of the laundry in the tub is not evenly distributed. When this happens, your washer however new will spin faster and harder in an attempt to balance the load, which can cause it to vibrate excessively.

Don’t worry there are a few things you can do to fix this problem.

First, try redistributing the laundry in the tub so that it is more evenly balanced.

You can also try adding a few towels to the load to help balance it out. If the problem persists, you may need to reduce the load.

2. Overloaded Tub

An overloaded drum/tub can cause your new washing machine to shake violently during the spin cycle. This is often caused by too much laundry being placed in the washer, which causes an imbalanced load. This can damage the washer and potentially cause injuries to those nearby.

To avoid this, be sure to only wash the recommended amount of laundry at one time.

3. Uneven Stand Can Be The Reason For Shaky Washing Machine 

If your washing machine is vibrating excessively, it is likely because the legs or the surface beneath them is not even. Uneven legs can cause the washer to shake and vibrate during the spin cycle because it became un capable of balancing itself.

First, you should check for any unkind movement by rocking your new washing machine to fix this problem. If not a single leg is broken or damaged, you will need to level the legs of the washer. You can do this by adjusting the leveling feet or blocks until the washer is level.

Once the washer is level, the vibrations should stop.

4. Unlevel Legs

Most people don’t realize that it is necessary to level the legs of a new washing machine before starting it. The reason for this is that an unleveled washing machine will vibrate and make noise for sure. The noise can be so loud that it will wake up the entire house.

Also, an unleveled washing machine can break over time from all the vibrating. So, it is very important to take the time to level the legs of your new washing machine before you start it.

5. Faulty/Stretched Suspension Springs

Suspension springs suspend the drum assembly from its compartment and are completely different than shock absorbers. The springs are located under the washer tub and support the tub during the washing cycle.

Over time, these springs can become weakened or broken, which can cause the washing machine to vibrate or shake. If you notice your washer shaking or vibrating more than usual, it’s likely that the suspension springs need a replacement.

Faulty or stretched suspension springs are one of the most common causes of washer shaking on the spin cycle. With the washer shaking violently it can even lead to damage to the washer or clothing.

Therefore, it’s important to check the suspension springs and make sure they are not stretched.

Replacing these springs is usually a fairly simple, inexpensive, and easy-to-do task.

How To Replace Suspension Springs On The Washing Machine?

So if your new washer is not draining properly or is making noise, it may be time to replace the suspension springs.

Before you begin, you’ll need to purchase the correct replacement springs for your specific model of washing machine. You can find this information in the owner’s manual or by contacting customer service.

Once you have the correct springs, follow these steps to replace the suspension springs on your washer:

  • 1. Unplug the washer from the power outlet.
  • 2. Tip the washer back on its side so that you can access the suspension springs.
  • 3. Use a pair of pliers to remove the old springs.
  • 4. Attach the new springs in the same position as the old ones.
  • 5. Tip the washer back upright and plug it back in.

6. Broken or Worn-out Shock Absorber

Like shocks in your bike or car, shocks in a washer help to dampen the vibration of the tub during the spin cycle. When your washing machine shocks are worn out, they can no longer effectively prevent the vibration, causing the washer to shake and vibrate heavily.

This can cause problems with the washer’s performance and can also lead to damage to the washer itself. If you suspect your washer’s shocks may be worn out, it is best to replace them as soon as possible.

Also, check for the warranty of your new washing machine. If this fault lies within warranty cover then contact the company for cost-free repair.

How To Check Or Replace Broken or Worn-out Shock Absorbers

Before you try to change the shock absorbers, it is best to check whether it is the cause of excessive vibrations in your washing machine or not. For this purpose do this:

  1. Unplug your washing machine from the power socket.
  2. Before you proceed further, it is advisable to empty the washing machine of dirty clothes and water.
  3. Open up the cabinet of your machine with a screwdriver.
  4. When you get the panel open, check for signs of leaks or cracks in all parts of the panel and shocks.
  5. If there are any, then likely that this is where additional vibration can cause them to expand.
  6. The next thing to do is check if the suspension rods or suspension springs need replacing by looking for major signs of wear and tear on them.
  7. If any of them show these signs, then look no further as this is your problem.
  8. Remove these old parts and replace them with new parts that you would acquire from one of your local home improvement stores along with spare parts for your model (your owner’s manual should have details as to how to fit these).
  9. Always note: If a single or more than one shock absorber are damaged or worn out, it is advised to change all of them at once.

Once done, re-assemble everything back together in reverse order like how you did when disassembling everything. Check before putting something together if the holes which hold all the screws line up properly so that nothing goes out of place.

7. The Suspension Rod Might Be Broken Or Damage

Suspension rods are an important part of a new washer. They are responsible for supporting the washer tub and keeping it level during the wash cycle. If a suspension rod is damaged or broken, it can cause the washer tub to become unbalanced and result in a noisy or shaking washer.

Also, check for the warranty of your new washing machine. If this fault lies within warranty cover then contact the company for cost-free repair.

What to do if a suspension rod of a washer is damaged or broken? 

If the suspension rod of your washing machine is not in a good shape or form, it is important to take immediate action to solve the problem. Depending on the severity of the damage, you may be able to fix the problem yourself.

However, if the damage is significant, it is best to contact a qualified appliance repair technician.

If you decide to attempt a repair on your own, be sure to disconnect the power to the washer before beginning any work.

After disconnecting the power, you will need to remove the washer tub. You can do this by removing a few screws that hold the tub in place.

Once the tub is removed, you will be able to access the suspension rod. Inspect the rod for any damage and replace it if necessary.

Once the new rod is in place, you can reassemble the washer and reconnect it to the power.

8. Damaged Snubber Pad Might Causing New Washing Machine Shaking Violently On Spin Cycle

A snubber pad is also a type of shock absorber that is used in washing machines. It is a small, often triangular-shaped piece of padding that is located near the edge of the washer tub.

It helps to cushion the washer during the spin cycle and can prevent damage to the washer’s internal components. The snubber pad can also help to reduce noise and vibration during the spin cycle.

So if your washer is shaking violently on the spin cycle then inspect the snubber pad. If it is damaged, worn out, or otherwise not performing properly, it will need to be replaced.

Also, check for the warranty of your new washing machine. If this fault lies within warranty cover then contact the company for cost-free repair.

9. Broken Balance Ring causes the New Washer to Shake Violently On Spin Cycle

The balance ring is located around the outer edge of the washing machine tub. It helps to keep the tub balanced during the spin cycle with the fluid inside it. When the balance ring is damaged or broken, it can cause the tub to become unbalanced, which will cause the washing machine to shake heavily and violently.

A broken balance ring can cause serious damage to the washing machine and even to your home if the washing machine is not properly supported. So if your new washing machine is shaking violently on the spin cycle then inspect the balance ring. If it is leaking, damaged, worn out, or otherwise not performing properly, replace it.

10. Counter Balance Spring Might Be The Reason

A damaged or broken counterbalance spring in a washing machine can cause the washer to shake violently during the spin cycle. This can be a very dangerous situation, as the washer can easily tip over or break if it is not properly balanced.

These springs help to keep the washer balanced during the spin cycle because they absorb all the vibrations of the machine.

So when it is damaged or broken, the washer can become unbalanced and shake. This can cause the washer to tip over or break, which can be dangerous. If you have a washer with a damaged or broken counterbalance spring, you should have it repaired or replaced as soon as possible.

Also, check for the warranty of your new washing machine. If this fault lies within warranty cover then contact the company for cost-free repair.

FAQs – New Washing Machine Shakes Violently During Spin Cycle

How to stabilize a new washing machine?

If your new washing machine is wobbling or shaking, there are a few things you can do to stabilize it.

First, make sure that the machine is level. You can do this by adjusting the legs on the machine until it is level.

If the machine is still wobbling, you can try adding weight to the base of the machine. You can do this by adding sandbags or bricks to the base of the machine.

If the machine is still wobbling, you can try moving it to a different location. Sometimes, the flooring in your home can cause the machine to wobble. By moving the machine to a different location, you may be able to stabilize it.

Conclusion

I am grateful that you took the time to read my guide on the potential causes and solutions for a new washing machine shaking violently during the spin cycle.

Always remember that before using your new washer, it is essential to double-check that it is installed properly and leveled correctly to forestall any issues. If anything happens, you can usually fix these issues at home by following our step-by-step guide.

Related Articles:

Whirlpool Washer Shaking Violently On Spin Cycle – Expert Guide 2022

LEAVE A REPLY

Please enter your comment!
Please enter your name here