Everyone wants clean and fresh clothes after washing. Many of you believe that it depends on the washing machine, detergent, quality, and temperature of the water. Of course, these are the major factors playing their role in perfect washing.
But most of you neglect another factor that is key to getting clean and fresh clothes after a wash.
Washing your clothes in a front load washer may seem simple and easy but how you load your washing machine is that factor that can make a great difference in the results.
Following is a quick guide to load a front load washing machine to maximize your laundry efforts. This will surely increase the life of your beloved washer (best washer in 2022) and clothes.
Dissect your washing load:
Your washing load may consist of some pair of jeans, shirts, under-garments, towels, curtains, bedsheets, etc. All you need is to balance your washing load with mixed types of clothes and fabrics for the best washing experience.
Moreover, set aside black and dark-colored fabrics and clothes for a separate load and white and light-colored for another one. It will always ensure the long life of your clothes.
If you have to load jeans and zippers, don’t forget to close up the zip. These zips can damage delicate and soft fabrics while tumbling in the washer.
Perfect Loading Order is the Key to the Best Washing
For a perfect washing experience, follow the proper loading order. Washing machines usually have written instructions on their manual or lid of the washer. If not available, follow the below order for optimum results.
- Detergent
- Laundry items
- Water.
Following this order can minimize the risk of fabric damage due to high strength detergents sitting on the clothes. Many front load washers come with a detergent dispenser. If available, use it. It dispenses detergent in a specific quantity and at the appropriate time according to washing load during a cycle.
Use Water efficiently
Front-load washers are more famous because of their energy efficiency and water efficiency. They use almost half of the water as of the traditional top loaders.
Usually, front load washing machines use water according to the load size in the cycle. After adding clothes, the washer pours little water in the cycle and start tumbling. When this water is absorbed by the garments the washer automatically sprinkles in more water to maintain the certain water level.
Automatic washers fill the water according to the load size however they also allow you to choose your wash cycle and maintain the desired water level. But just be cautious! Front-loaders require less water usage as compared to top-loading washers.
Use Detergent Precisely
Traditional top load washers use more water as compared to front load washers and the same is the case for detergent. Due to less water usage in the front load washers, you must use detergent in small quantities or as precisely as possible.
New front load washers in the market now come with a special drawer or compartment for detergent dispensation. These intelligent washers dispense an accurate amount of detergent in the washing drum according to the size of the load in the cycle.
Always remember that too much foam and bubbles in the washing drum can cause damage to the electronic systems in your front load washer. On the other hand, low water levels and extra detergent can ruin your fabrics because detergent will be left in them.
Overloading the Machine is always a burden for it
That means don’t overweight your washing machine with too many garments in a single cycle. Overloading your washer always results in low water circulation which ultimately affects the cleaning process.
Overloading has many bad effects starting from less cleaning and sometimes ending up to replacement of your washing machine.
When garments are packed too tightly in the washing drum this converts your washer into a “Walking” washer. Overloading results in the imbalance of the washer during washing cycles and causes it to move from its place.
Too many overloading attempts can damage the washer’s frame and also reduce the efficiency of the motor. That will eventually drag you to buy a new washer.
So don’t overload your washer as far as possible.
Take care of your washer:
Front-load washers are best for water and energy-efficient washing but are difficult to take care of. They may become smelly having a musty odor after a few months of use. And if not cleaned regularly this odor may transfer to your clothes.
This all happens when the washer is not cleaned properly after washing. So always clean your washer properly. Use a plain cloth and dry out all the water from inside the washing drum. After washing your clothes, you must leave the door open for some time so the fresh air can circulate in the drum.
