It’s common to neglect cleaning your washing machine. However, this can result in mold and mildew forming on the inside of the machine. Washing machines can collect dirt in hard-to-reach places. These substances are very hard to remove, so it is best to clean your washing machine regularly.

This article walks you through how to do just that with a few simple steps. It will teach you what you need to know about how to clean the inside of the washing machine and how to take care of the outside so that it lasts longer.

Clean A Washing Machine In 10 Minutes

Cleaning a washing machine is the last thing anyone wants to do. However, it is necessary for your health and can extend the life of your appliance.

how to clean a washing machine with vinegar

There are several ways to get the job done that do not require expensive cleaners or hard scrubbing. You can clean a washing machine in 10 minutes and be able to enjoy fresh-smelling and clean laundry soon.

Step One: Put one cup of bleach into the drum before adding clothes or fabric softener. Allow them both time to react before starting the wash cycle.

Step Two: Add ¼ cup of baking soda along with some detergent for extra grease-fighting power. Turn on the washer and let it run for five minutes at least once every two months as part of a deep cleaning process if possible! You can also do this with vinegar in place of the baking soda.

Step Three: Fill a bucket with hot water and mix it up with your hands to create suds. This soap will help break up any grime or build-up so that you can easily wipe it away.

Apply the soap generously around the door seal, rubber ring, and drain area. Allow the water to sit for a few minutes before wiping it away.

Step Four: Add ¾ cup of white vinegar into the drum and then fill with hot water from a bucket until it’s approximately one-third full. Run an empty cycle for about five minutes. This helps rid your washing machine of any build-up that may be trapped inside and the foul odor will vanish immediately.

Then run a short hot wash cycle with detergent to finish up the job. You can do this once every six months or so to help prevent any grime and mold buildup.

Step Five: Rinse the inside of the washing machine drum with clean water and wipe it dry with a towel before closing the door and adding fresh clothes for your next load of laundry.

Step Six: Some owners swear by using denture tablets or liquid to clean their washing machines. You can use them once every three months or so to help reduce odors while fighting mold. Put half a cup in the detergent section and run an empty cycle with hot water.

How To Clean The Washing Machine From Outside

The outside cleaning process involves washing your washing machine‘s front, top, sides, and back.

  • Use warm water and soap if necessary (dishwashing liquid will work well).
  • Use an old toothbrush or scrubbing pad if you notice grime settling in hard-to-reach cracks if desired…such as around knobs and buttons!
  • Allow your washing machine to air-dry.
  • You can also use a towel if you’d like, but be careful not to leave any water spots on the front of the machine that may dry and become permanently etched into the appliance’s surface over time!
  • The outside of your washing machine should be dried off completely before shutting its door for storage!

If you enjoyed this informative article on how to clean a washing machine then be sure to pass it along to family members or friends that may benefit from its advice!


Please enter your comment!
Please enter your name here